EPA Approved Methods for Testing Drinking Water under the Total Coliform Rule

This is one reference for the analytical sampling methods approved by EPA for Drinking water.  This interprate as the methods needed to be used if potable water, dump tank water, etc is to be sampled for total coliform.  I thought this might be a useful tool as we move forward in gathering more information on the methods for anyalysis of water samples

From the publication: Analysis for the following contaminants shall be conducted in accordance with the methods in the following table or their equivalent as determined by
EPA. The methods and monitoring requirements for these contaminants are specified in 40 CFR 141.21. Additional methods are listed in Appendix A to
Subpart C of Part 141.

More on this can be found at: EPA Analytical Methods for Drinking Water Compliance Monitoring under the Total Coliform Rule

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: